Fanless Industrial PC/Inte Core 2 Duo/Core Duo/ Celeron M/Fan-less System with 1 PCI Expansion Slot
RHINO Appliances can be supplied in two formats; either as a hardware-only solution (RHINO-220), or pre-loaded with IntraVUE Lite Industrial Network Management software (RHINO-220IL).
The RHINO-220IL is configured with an Intel Pentium M 600MHz or Celeron M 1.0GHz powered embedded automation computer and a pre-configured Windows XP Operating System. The appliance supports one SO-DIMM 400 FSB memory module (up to 1 GB). Dual Intel® 82562ET 10/100 Ethernet controllers provides ample network traffic for data exchanges. The I/O subsystem supports four serial ports for legacy device connection; two RS-422/RS-485 and two RS-232 interfaces are supported with Automatic Flow Control, ±15 KV ESD protection and 2000VDC optical isolation. Memory backup is supported via an optional NVRAM socket dedicated plug-in memory.
Ethernet applications in industrial environments are continually evolving. With a shift from traditional IT-based high level communications to real time applications (often in separate and isolated networks), Ethernet support by local resources is becoming increasingly important. In these scenarios, the Rhino-220IL with IntraVUE Lite provides the ideal platform for local continuous monitoring and trobleshooting of Industrial Ethernet communications at the PLC and I/O level. The RHINO appliance is also well suited for remote isolated I/O networks where there is no local computer to run IntraVue Lite; the device does not require a monitor, keyborad or mouse, as all viewing and administration is accomplished remotely. The RHINO-220 Appliance on it's own is a powerful platform for a wide variety of applications in Industrial environments.
| 
Click to Enlarge Image |
Product Features| | - ETX Computer-on-Module standard Appliance
- Designed for 24/7 local or remote operation
- Fanless operation
- 2x RS-232 and 2x RS-422/485 ports to support legacy devices
- Type I/II PC Card (PCMCIA)
- Compact flash Socket, VGA, USB Port, LPT, KB, Mouse, Ethernet and Audio
- Single DC input, Voltage From +9 to +36 VDC
- PC/104 plus Connectors for Both PCI and ISA Interface
- Available 'hardware only' or pre-configured with Windows XP and IntraVUE Lite Network Management Software
|
|
Product Specification| |
HARDWARE SPECIFICATIONS (RHINO-220)
Interface
~ Main Board: ICES 101 ETX Module (compatible with ETX v1/2/3 standards)
~ CPU: Intel Pentium M 600MHz or Celeron M 1.0GHz
~ Main Memory: 1x 200-pin SO-DIMM socket for up to 1GB Non-ECC Non-Registered DDR
SDRAM memory
~ Device: 1x front access PCMCIA socket, 1x Internal Compact Flash socket, 1x
Internal 2.5” HDD Drive bay, 1x NVRAM socket
~ I/O Interfaces - Front
~ Power/HDD Status LEDs
~ 1x external access Compact Flash socket
~ 2x DB-9 for COM1 and COM2
~ 1x screw terminal for COM3 and COM4 supporting RS-422/485
~ 2x USB 2.0 ports
~ 2x LEDs, connect to GPIO, programmable for alarm or other application
~ 1x PC Card (PCMCIA) Socket
~ I/O Interfaces - Rear
~ 2x 10/100 Ethernet LAN
~ 2x USB 2.0 ports
~ 1x Keyboard/Mouse connector
~ +9-+36VDC Power Input
~ 1x Power Reset Button
~ 1x VGA Connector(DB15)
~ 1x Audio-out and 1 x Mic connector
~ 1x Parallel Port
~ Dimensions: 260mm (W) x 176mm (H) x 55mm (D)
Environmental
~ Operating Temperature: -10°C to 50°C
~ Storage Temperature: -20°C to 85°C
~ Operating Humidity: 5%-95% RH (Non-condensing)
IntraVUE Lite Specifications (RHINO-220IL)
~ Auto Discovery: Yes
~ Auto Mapping: Yes
~ Network Range: Single class C Subnet
~ Number of Networks: 1
~ Number of IP Devices: Up to 256
~ VLAN Support: One (local)
~ Remote Viewing: Yes
~ Event log: Yes
~ Trending Graphs: Yes
~ Search: Yes
~ Import/Export: Yes
~ Backup and Restore: Yes
~ Web Links: Yes - 12
~ Manual Device Adding: Yes
~ Alarm via Modbis TCP: Yes
~ Number of views: 6
Certifications
~ CE/FCC
Warranty: 3 years (hardware only) |
|
Click here for more information.
|